Engineering Applications
Page 9 of 16
-
The Digital Design Environment (DDE) by CTDOT is an environment that allows the creation, modification, and exchange of high-value electronic engineering data. The information and resources contained in the DDE have been developed for use with CTDOT’s foundational CAD platforms of OpenRoads Designer, OpenBridge Modeler, and OpenBuildings Designer by Bentley Systems Inc.
Date Posted: 1/14/2020
Last Updated:
-
This section will give an overview of OpenRoads Designer's new terms and model types.
Date Posted: 1/21/2020
Last Updated:
-
Date Posted: 9/1/2022
Last Updated:
-
This section will give an overview of OpenRoads Designer Roadway Modeling.
Date Posted: 1/21/2020
Last Updated:
-
This section will give an overview of Creating Sheet Models.
Date Posted: 1/21/2020
Last Updated:
-
Section 1 - Introduction and Tools
INTRODUCTION DRAINAGE AND UTILITIES TOOLS
Date Posted: 1/21/2020
Last Updated:
-
Section 1 - Landscape Base Modeling Overview
This section will give an overview of the Landscape Base Modeling procedures.
Date Posted: 1/21/2020
Last Updated:
-
Section 1 - Levels and Element Templates
Level Naming and Element Templates
Date Posted: 1/21/2020
Last Updated:
-
Section 1 - Site Base Modeling Overview
The information and resources contained in this section of the DDE have been developed for use with OpenRoads Designer by Bentley Systems Inc.
Date Posted: 1/21/2020
Last Updated:
-
Section 1 - Traffic Engineering Base Modeling Overview
This section will give an overview of the Traffic Engineering Base Modeling procedures.
Date Posted: 1/21/2020
Last Updated:
-
File Naming
Date Posted: 1/21/2020
Last Updated:
-
This section will give an overview of the OpenRoads Geometry Tools.
Date Posted: 1/21/2020
Last Updated:
-
What data and information is needed to begin a drainage system design
Date Posted: 2/2/2020
Last Updated:
-
What data and information is needed to begin a drainage system design
Date Posted: 2/2/2020
Last Updated:
-
Section 2 - OpenRoads Drawing Production
This section will give an overview of the OpenRoads Designer uses of Named Boundaries to define plan, profile, and cross section clipping areas.
Date Posted: 1/21/2020
Last Updated: